Enhancements
Release M.08.78 Enhancements
Release M.08.78 Enhancements
Using Fastboot To Reduce Boot Time
The fastboot command allows a boot sequence that skips the internal
Syntax: [no] fastboot
Used in the global configuration mode to enable the fastboot option. The no version of the command disables fastboot operation.
Syntax: show fastboot
Shows the status of the fastboot feature, either enabled or disabled.
For example:
ProCurve(config)# show fastboot
Fast Boot: Disabled
Release M.08.79 Enhancements
CLI Port Rate Display
Beginning with release M.08.79 the CLI “show interface [port list]” command includes the port rate in the display. The rate displayed is the average for a period of 5 minutes, given in bps for 1G ports, or in Kbps for 10G ports. You can also use the CLI command: show interface
26