Software Fixes in Release M.08.51 - M.10.72

Release M.10.45

Release M.10.45

Problems Resolved in Release M.10.45 (Not a Public Release)

■Web-UI (PR_1000416955) — Inserting an LH GBIC into dual personality ports results in the LH ports not appearing in the device view.

■Meshing (PR_1000453201) — Concurrent use of meshing and spanning tree may result in instability in spanning tree, with chronic root bridge transitions every 20 to 40 seconds.

■Config (PR_1000400244) — The switch prompts the user to save config, even though no apparent changes have been made. However, if SNMP sets have occurred in the background, then the user will still see the save config prompt due to the configuration changes caused by the SNMP sets.

Release M.10.46

Problems Resolved in Release M.10.46 (Not a Public Release)

■SSH (PR_1000453226) — Configuration of SSH login to the manager mode (using the command, aaa authentication ssh enable public-key <enter>) triggers an error “Not legal combination of authentication methods,” but it should be a valid command syntax.

■DIPLD (1000457808) — When a user with a DHCP assigned IP address de-authenticates and then re-authenticates, the DIPLD bindings show the port is bound to multiple IP addresses, and the switch will accept traffic from both IP addresses.

Release M.10.47

Problems Resolved in Release M.10.47 (Never Released)

■SNMP (PR_1000448463) — The SNMP Engine ID Discovery process described in RFC 3414 is not working properly.

■SSH/SCP (PR_1000453751) — The switch does not properly exit a secure copy protocol (SCP) session, particularly when a software image is transferred.

■Trunking (1000461440) — When dynamic ARP protection and DHCP snooping are configured, a trunk’s trust status cannot be configured from the appropriate interface configuration context.

■SSH/SCP (PR_1000742969) — The following issues with using SSH/SCP were fixed.

•In show ip ssh, sessions 3 and 4 may display "console" instead of "inactive," when those sessions are not in use.

175