Enhancements

Release M.10.39 Enhancements

Select whether SNMP traps or informs are sent to this management station.

For more information on SNMP informs, see “Enabling and Configuring

SNMP Informs” on page 119.

[version <1 2c 3>]

Select the version of SNMP being used.

Note: SNMP informs are supported on version 2c or 3 only.

[<none all non-info critical debug>]

Options for sending switch Event Log messages to a trap receiver. The levels specified with these options apply only to Event Log messages, and not to threshold traps.

You can see if informs are enabled or disabled with the show snmp-servercommand as shown in Figure 11.

ProCurve(config)# show snmp-server

 

SNMP Communities

 

 

 

 

 

 

 

 

 

Community Name

MIB View Write Access

 

---------------- --------

------------

 

 

 

public

Manager

Unrestricted

 

 

Trap Receivers

 

 

 

 

 

 

 

 

 

Link-Change Traps Enabled on Ports [All] : All

 

 

Send Authentication Traps [No] : No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Informs [Yes] : Yes

 

Community

Events Sent in Trap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Address

 

 

 

 

 

 

 

 

 

 

 

 

 

---------------------- ---------------- -----------------

--

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Excluded MIBs

 

 

 

 

 

 

 

 

Snmp Response Pdu Source-IP Information

 

 

 

Selection Policy

 

 

: Default rfc1517

 

 

Trap Pdu Source-IP Information

 

 

 

Selection Policy

 

 

: Default rfc1517

 

Figure 11. Example Showing SNMP Informs Option Enabled

Release M.10.39 Enhancements

Release M.10.39 includes the following enhancement:

120