Software Management

Install Recommendations for I.08.12 Boot ROM Update

Install Recommendations for I.08.12 Boot ROM Update

When installing the M.10.17 software to load the I.08.12 ROM version, ProCurve recommends that you use the “fastboot” feature and the “reload” command after updating to M.10.17, as shown below.

ProCurve3400cl#config ProCurve3400cl(config)# fastboot

ProCurve3400cl(config)# copy tftp flash <ip address of tftp server> M_10_17.swi

The Primary OS Image will be deleted, continue [y/n]? y Validating and Writing System Software to FLASH...

ProCurve3400cl(config)# reload

Device will be rebooted, do you want to continue [y/n]? y

Rebooting the System

Then reconnect and run the show flash command:

ProCurve3400cl#

show flas

 

 

Image

Size(Bytes)

Date

Version

-----

----------

-------- -------

Primary Image

: 3576793

09/26/06 M.10.17

Secondary Image : 3506627

05/26/06 M.10.07

Boot Rom Version: I.08.12

 

 

Current Boot

: Primary

 

 

Please also refer to “Known Issues” on page 24 for additional information regarding updating to the M.10.20 software release.

6