Software Fixes in Release M.08.51 - M.10.72

Release M.10.14

Release M.10.14

Problems Resolved in Release M.10.14

■CLI (PR_1000342461) — Command “show lldp info remote <port number>" reports incorrect information for remote management address.

■LACP (PR_1000352012) — LACP state change does not properly reset 10Gig port. Communication through port fails until the port is toggled.

■LLDP (PR_1000310666) — The 'show lldp' command does not display information learned from CDPv2 packets.

■Trunking (PR_1000352851) — Source Port Filtering on trunks does not work, even though the switch accepts the configuration.

■XRRP (PR_1000350110) — XRRP loses layer 3 functionality (pinging) after VLAN is added.

Release M.10.15

Problems Resolved in Release M.10.15

■CLI (PR_1000358129) — CLI hangs after running RMON traps code.

■Crash (PR_1000351410) — Bus error when pinging switch IP from local serial console.

PPC Bus Error exception vector 0x300: Stack-frame=0x067d40e8 HW Addr=0x33cc33d2 IP=0x0056a8f8 Task='tNetTask' Task ID=0x67d4278 fp:

0x00000014 sp:0x067d41a8 lr:

■Crash (PR_1000352177) — Switch crash when pinging an unreachable host repeatedly, with a message similar to:

Software exception at alloc_free.c:362 -- in 'mLinkTest', task ID = 0x5be24d0.

■Hang (PR_1000346328) — Switch hangs during initialization, switch may fail to boot. RMON alarms/events configuration files may be corrupted.

Release M.10.16

Problems Resolved in Release M.10.16 (never released)

■802.1x (PR_1000353479) — Changing the supplicant start period (e.g., "aaa port-access supplicant A1 start-period 15") corrupts the supplicant password on a switch that is config- ured as a supplicant.

163