HP 3400CL-24G manual Release M.10.21, Release M.10.22

Software Fixes in Release M.08.51 - M.10.72

Release M.10.21

■Enhancement (PR_1000358900) — A RADIUS accounting enhancement was made. More information about this enhancement will be made available in a future update.

Release M.10.21

Problems Resolved in Release M.10.21 (Not a general release)

■Crash (PR_1000368540) — The switch may crash with a message similar to:

Software exception at parser.c:8012 -- in 'mSess2', task ID = 0x90e10e0 -> ASSERT: failed.

■Crash (PR_1000372183) — When a meshed network of switches is connected to a non- meshed switch, the meshed switch may crash with a message similar to:

Software exception at ldbal_util.c:5970 -- in 'eDrvPoll', task ID = 0x5f765a0 -> ASSERT: failed

■Crash (PR_1000376546) — Rebooting with IGMP enabled may cause the switch to crash with a message similar to:

Software exception at sw_sem.c:112 -- in 'swInitTask', task ID = 0x836b2c40 -> semTake() NULL semaphore: ip_igmp_init.c:1304.

■Web-UI (PR_1000373711) — Attempting to access the WebUI of a stack member without being logged on as Manager returns a "404 Page Not Found" error.

■XRRP (PR_1000368594) — When XRRP infinite failback is enabled, the switch fails to forward packets after a reboot of the Master.

Release M.10.22

Problems Resolved in Release M.10.22 (Not a general release)

■Crash (PR_1000375501) — When a link is disconnected and reconnected on a tagged

802.1X supplicant port, the switch may crash with a message similar to:

Software exception at macaddr.c:215 -- in 'm8021xCtrl', task ID = 0x8ad9960 -> ASSERT: failed

■Enhancement (PR_1000376406) — Loop Protection feature additions, including packet authentication, loop detected trap, and receiver port configuration.

165