HP 3400CL-24G manual Release M.10.71, Problems Resolved in Release M.10.72

Software Fixes in Release M.08.51 - M.10.72

Release M.10.71

Release M.10.71

Problems Resolved in Release M.10.71 (Not a Public Release)

■802.1X (PR_0000014842) — If an invalid number of characters are used at the CLI for the command aaa port-access supplicant <port number> secret, the CLI returns an error message

that references the wrong port number for the supplicant being configured.

■Enhancement (PR_0000011636) — This enhancement adds the client’s IP address to the RADIUS accounting packets sent to the RADIUS server by the switch. The IP address of the client is included in the RADIUS accounting packet sent by the switch to the RADIUS server. The client obtains the IP address through DHCP, so DHCP snooping must be enabled for the VLAN of which the client is a member.

■Mirroring (PR_0000008008) — When a port that was previously configured to be moni- tored to a mirror-port has that monitoring configuration removed, traffic continues to be sent to the mirror port until the switch is reloaded.

■Crash (PR_0000006336) — Copying a configuration that contains the lines interface all lacp and snmp-server enable traps link-change all from a TFTP server to the switch may cause an unexpected reboot with a message similar to the following.

Software exception at cli_xlate.c:3692 -- in 'mftTask', task ID = 0x5ee17f0.

■SNMP (PR_0000002764) — The SNMP MIB object that allows authenticator functionality on a port to be enabled or disabled (hpicfDot1xPaePortAuth) can be set to an invalid value.

■802.1X (PR_0000012568) — There may be a problem with a login error message.

■TACACS (PR_0000008268) — If an invalid IP address is configured for the TACACS server, the switch will not allow its removal from the configuration at the CLI.

■Controlled Direction (PR_0000009818) — The switch does not properly enable or edit the controlled direction parameter (in the config line aaa port-accesscontrolled-direction <inoutboth>) in the configuration.

■BPDU-Protection (PR_0000012541) — The presence of a trunk group in a switch with STP BPDU-protection configured may trigger the switch to block the wrong port when a BPDU is received.

Release M.10.72

Problems Resolved in Release M.10.72

■Authentication (PR_0000011917) — The switch does not recognize the "session-timeout" attribute from a RADIUS server following MAC authentication.

183