Software Fixes in Release M.08.51 - M.10.72

Release M.10.30

■Transceiver hotswap (PR_1000390888) — Transceiver hotswap issues:

•Simultaneous hotswap of transceivers on both dual-personality ports will only detect a single change.

•After certain transceiver hotswaps, the in/out LED indicator will not match the current status of the transceiver.

•Unsupported mIni-GBIC's hotswapped out of dual personality ports will leave the transceiver in an unknown state of partially inserted.

■Transceiver hotswap (PR_1000294081) — The hotswap of a J4858A or B revision wire release style mini-GBIC will result in the switch indicating a port fault condition for that port.

■Web UI (PR_1000326265) — Attempting to access the Web UI of a stack member hangs the browser.

Release M.10.30

Problems Resolved in Release M.10.30

■Daylight savings (PR_1000364740) — Due to the passage of the Energy Policy Act of 2005, Pub. L. no. 109-58, 119 Stat 594 (2005), starting in March 2007 daylight time in the United States will begin on the second Sunday in March and end on the first Sunday in November.

■CLI (PR_1000395256) — The "loop-protect PORT-LIST receiver-action <action>" command does not enable the ports as it should.

Release M.10.31

Problems Resolved in Release M.10.31

■CLI (PR_1000240838) — If an invalid time is entered using "clock set" command, the switch responds with an "invalid date" error.

■CLI (PR_1000199785) — The tab help function (command-completion) for "IP RIP authen- tication" is inaccurate. The help selection lists "OCTET-STR Set authentication key" when it should be "ASCII-STR Set RIP auhentication key (maximum 16 characters)."

■Crash (PR_1000398315) — Under certain conditions when Web Auth is in use, the switch may crash with a message similar to:

PPC Bus Error exception vector 0x300:

Stack-frame=0x017b0dd0 HW Addr=0x8200a225 IP=0x00508ce4 Task='tHttpd' Task ID=0x17b0fa8

169