Software Fixes in Release M.08.51 - M.10.72

Release M.08.70

■Port Security (PR_1000203984) — CLI port-security "mac-address" command will save address above the limit.

■SNMP (PR_1000212170) — The Switch transmits Warm and Cold Start traps with an agent address of 0.0.0.0.

■Spanning Tree (PR_1000214598) - The switch will not accept the spanning-tree 1 mode fast command within the CLI.

■System Hang (PR_1000200341) - Added an exception handler to prevent a case where the system may hang.

■XRRP (PR_1000217922) — XRRP router may fail back to the XRRP peer router even with Infinite Failback enabled.

Release M.08.70

Problems Resolved in Release M.08.70 (Not a general release)

■ACL (PR_1000213663) — When configuring ACLs, the Switch incorrectly reports:

Duplicate access control entry.

■Broadcast throttling (PR_1000240494) — Broadcast throttling does not work correctly on Gigabit/second and 10-Gigabit/second ports.

■Mesh (PR_1000218463) — If a mesh link goes down and a redundant (xSTP) link external to the mesh goes into a forwarding state, connectivity across the mesh may be lost for a previously learned MAC address.

■MIB (PR_1000236875) — The switch is reporting etherType/size errors as part of “ifInDiscards,” but the packets are not really dropped.

■Packet buffers (PR_1000237366) — Improved packet buffer allocation for better data handling.

■Self-test (PR_1000239302) — The Switch reports a false self-test failure when a J8436A SR transceiver is installed in Port B of a J8435A 10-GbE Media Flex module.

■Web/Stack Mgmt (PR_1000239924) — As an IP Stack Management Commander, the Switch does not display the device view (back of box) for a 2626 switch that is a member.

Release M.08.71

Problems Resolved in Release M.08.71 (Never released)

■Crash (PR_1000232283) — The switch may crash with a message similar to:

Software exception at fileTransferTFTP.c:182 -- in 'mftTask', task ID = 0x107ee0.

150