HP 3400CL-24G manual Release M.08.97, Release M.10.01, Release M.10.02, Release M.10.03

Software Fixes in Release M.08.51 - M.10.72

Release M.08.97

Release M.08.97

Problems Resolved in Release M.08.97 (Never released)

■OSPF (PR_1000319678) — Switch does not accept IP fragmented OSPF packets.

Release M.10.01

Note: The M.10.xx software releases run only on the ProCurve 3400cl series.

Problems Resolved in Release M.10.01 (Not a general release)

■Boot ROM/X-Modem (PR_1000327175) - Boot ROM I.08.11 allows larger file images to be loaded into flash and corrects Console port (X-Modem) reliability issues.

Note: The first time the 3400cl switch boots up with software version M.10.01 or later, Boot ROM version I.08.11 is automatically installed.

■Crash/ACL (PR_1000323675) — The Switch may crash with a message similar to:

ASSERT: Software exception at aaa8021x_proto.c:501 -- in 'm8021xCtrl'

■ICMP (PR_1000235905) — Switch does not send a 'destination unreachable' response message when trying to access an invalid UDP port.

■SNMPv3 (PR_1000325021) — Under some conditions, SNMPv3 lines are not written to the running-configuration file.

Release M.10.02

Problems Resolved in Release M.10.02 (Not a general release)

■Enhancement (PR_1000328392) — Added RADIUS assigned ACLs.

■Enhancement (PR_1000328716) — Added new "show sFlow" commands.

Release M.10.03

Problems Resolved in Release M.10.03 (Never released)

■Crash/sFlow(PR_1000322009) — The Switch may crash with a message similar to:

Software exception in ISR at queues.c:123.

■Crash/sFlow (PR_1000327132) — The Switch may crash with a message similar to:

Software exception in ISR at btmDmaApi.c:304.

158