HP 3400CL-24G manual Release M.10.26, Release M.10.27, Crash at cliopershowaction.c1298

Software Fixes in Release M.08.51 - M.10.72

Release M.10.26

■STP/RSTP/MSTP (PR_1000386113) — In some cases STP/RSTP/MSTP may allow a loop on 10-Gig ports, resulting in a broadcast storm.

Release M.10.26

Problems Resolved in Release M.10.26 (Not a general release)

■Enhancement (PR_1000381681) — This enhancement added eavesdrop protection - the ability to filter unknown Destination IP Address (DA) traffic.

■MSTP (PR_1000385573) — MSTP instability when root switch priority is changed. This causes other switches with better priority to each assert themselves to be root thus causing a root war to occur.

■SNMP (PR_1000388175) — SNMP PDU configuration enhancement CLI commands are not working.

Release M.10.27

Problems Resolved in Release M.10.27 (Never released)

■Crash (PR_1000382962) — Executing the CLI command, "sho int" on a mini-GBIC that isn't linked, may cause the switch to crash with a message similar to:

Divide by Zero Error: IP=0x8017becc Task='mSess1' Task ID=0x834b19d0 fp:0x00000018 sp:0x834b0d20 ra:0x8017be18 sr:0x1000fc01 Division by

0Crash at cli_opershow_action.c:1298.

■CLI (PR_1000380660) — The "show tech transceivers" CLI command displays the wrong message when inserting an "A" version transceiver into a switch that only supports "B" version transceivers. Also, "B" version CX4 transceivers show up as "A" and "A" version SR, LR, and ER transceivers show up as "B" versions.

■CLI (PR_1000390042) — Corrupted Spanning Tree Status/Configuration Menu screens.

■Enhancement (PR_1000374085) — This enhancement expands the use of the Controlled Directions parameter to also support MAC/Web authentication.

■MSTP/VLAN (PR_1000381648) — When a client port is reassigned to a VLAN associated with another MSTP instance, the MAC appears to be incorrectly recorded on the wrong port after that port is assigned back to the original VLAN associated with the other MSTP instance.

167