Software Fixes in Release M.08.51 - M.10.72

Release M.08.75

Release M.08.75

Problems Resolved in Release M.08.75

■LR optic (PR_1000282195) — After a switch reboot, certain 10GbE X2-SC LR Optic (J8437A) transceivers will lose its configuration. Administrator will be unable to turn off LACP, and CLI commands will not be displayed.

■XRRP (PR_1000280213) — When configuring a XRRP instance, although the subnet is configured properly, the following error message is logged:

No subnet configured for the IP address

Release M.08.76

Problems Resolved in Release M.08.76 (Never released)

■IP Routing (PR_1000254254) — L3 address table is not learned correctly from unsolicited ARPs.

■RADIUS (PR_1000285456) — If more than one RADIUS assigned vendor specific attribute (including Port-cos, rate-limiting-ingress, or ACLs) is configured with a non-vendor specific attribute, only the first vendor specific attribute may be recognized by the switch.

■TCP (PR_1000246186) — Switch is susceptible to VU#498440.

■VLAN (PR_1000214406) — When trying to delete a VLAN created as a management VLAN, the switch fails to remove the management VLAN statement from the running configuration file.

Web UI (PR_1000284653) — When using the web user interface "IP Stack Management", and there are more than 100 potential Members present on a VLAN, the Switch will learn new potential Members, but deletes previously learned Members.

Release M.08.77

Problems Resolved in Release M.08.77 (Not a general release)

■ACL (PR_1000283338) — The commands "show port-access mac" and "show port- access web" incorrectly display the number of clients authenticated.

■Meshing (PR_1000219337) — Unstable RSTP topology when root switch is power-cycled and connected to a mesh.

152