Enhancements
Release M.10.04 Enhancements
Note
The router rip command exists in previous software versions. In this implementation, however, RIP must be enabled in order to open the port on the switch.
Enabling/Disabling Stacking
To enable/disable stacking, use the following command.
Syntax: [no] stack
Enables stacking (SNMP) on the switch. (Default: disabled)
Note
The stack command exists in previous software versions. In this implementation, however, both stacking and SNMP must be enabled to open the port on the switch. If either feature is disabled, the port will remain closed.
Spanning Tree Show CommandsThe show
77