Software Fixes in Release M.08.51 - M.10.72

Release M.08.62

■Web UI (PR_1000177915) — Device View from the Web user interface is missing.

■Web UI/Port Security (PR_1000195894) — The Web user interface does not allow the user to select multiple ports when configuring port-security.

Release M.08.62

Problems Resolved in Release M.08.62

■Crash (PR_1000207542) — The switch may crash with a bus error or task hang.

■Crash (PR_1000216170) — The switch crashes with an mftTask Bus Error whenever a user attempts to upload the startup-configuration from a TFTP server. The switch accepts the command with no errors, however the system immediately crashes after the reboot.

■Jumbo/Flow control (PR_1000217576) — When the switch is configured for both flow control and jumbo packets, an Error Message is not generated as stated in the instruction manual.

■Port Security (PR_1000203984) — When the limit is reached, the warning message is displayed: Number of configured addresses on port xx exceeds address- limit. The address is saved and displayed in the address list of Show Port-securityxx. Data from the added address is passed by the switch.

Release M.08.63

Problems Resolved in Release M.08.63 (Not a general release)

■Crash (PR_1000205768) — A null System Name in the Web user interface may crash the switch with a message similar to:

"Software exception at lldpSysNameTlv.c:251 -- in 'mlldpCtrl', task ID = 0x12dc88 -> ASSERT: failed".

■Web UI (PR_93721) — The web user interface Status screen does not display all ports, and the scroll bar does not work.

■Web UI (PR_1000191635) — The Port column may not be sorted correctly in all Web user interface screens.

■XRRP (PR_1000217651) — Running different XRRP versions causes excessive event log messages like:

Rcvd a pkt with version number 2, expected 1 Remote rtr 2 domain 2 is miss-configured.

■Crash (PR_1000217354) — Bus error in mSnmpCtrl task when adding a less-specific route and adding it again through the CLI.

147