HP 3400CL-24G manual Release M.08.80 through M.08.83 Enhancements, Operating Notes

Enhancements

Release M.08.80 through M.08.83 Enhancements

The following shows a sample output from this new command.

ProCurve# show interface port-utilization
Port	Mode		-------	Rx	------	-------	Tx	------
				-------			------
			KBits/s	Pkts/s	Util	KBits/s	Pkts/s	Util
----	----	+	-------	-------	------	-------	------	------
1	100FDx		100000	525	12	100000	400	10
2	1000FDx		0	0	0	0	0	0
3	100FDx		536	44	00.53	504	0	00.50
4	1000FDx		0	0	0	0	0	0
5	1000FDx		0	0	0	0	0	0
6	1000FDx		0	0	0	0	0	0
7	1000FDx		0	5	0	0	0	0
8	1000FDx		0	5	0	0	0	0
9	100FDx		0	30	0	0	0	0

Figure 2. Example rate display output for ports

Operating Notes

■For each port on the switch, the command provides a real-time display of the rate at which data is received (Rx) and transmitted (Tx) in terms of kilobits per second (KBits/s), number of packets per second (Pkts/s), and utilization (Util) expressed as a percentage of the total bandwidth available.

■As in previous software versions, the show interfaces <port-list> command can be used to display the current link status and the port rate average over a 5 minute period. Port rates are shown in bits per second (bps) for ports up to 1 Gigabit, and are shown in kilobits per second (Kbps) for 10 Gigabit ports.

Release M.08.80 through M.08.83 Enhancements

Software fixes only; no new enhancements.

27