Software Fixes in Release M.08.51 - M.10.72

Release M.10.17

■DHCP Protection (PR_1000360273) — DHCP Lease renewal packets received on an untrusted port are dropped.

■DHCP Protection (PR_1000360254) — An entry with an expired lease is not removed from the binding table.

■Link Failure (PR_1000361488) — The J8440B version 10-GbE X2-CX4 may not initialize correctly, causing link failure.

■Selftest Failure (PR_1000360970) — A 10-GbE CX4 module (J8434A) will fail selftest following power cycle or software update if it is connected to another switch that is running spanning-tree.

Release M.10.17

Problems Resolved in Release M.10.17

■Crash (PR_1000367036) — When a transceiver or mini-GBIC is hot-swapped the switch may crash with a message similar to the following.

Software exception at buffers.c:2238 -- in 'mPpmgrCtrl', task ID = 0x6351358 -> ASSERT: failed

■Enhancement (PR_1000346164) — RSTP/MSTP BPDU Protection enhancement. See “Spanning Tree BPDU Protection” on page 91 for details.

Release M.10.18 - Release M.10.19

Releases M.10.18 and M.10.19 were never built.

Release M.10.20

Problems Resolved in Release M.10.20

■10-GbE <no PR> — Resolution for failure to initialize the 10-GbE link in port 26 of the ProCurve 3400cl-24G switch, or port 50 of the ProCurve 3400cl-48G switch, after update to software version M.10.17. See “Known Issues” on page 24 for additional information.

■Enhancement (PR_1000355089) — This enhancement increases the maximum number of 802.1X users per port to 8.

■Enhancement (PR_1000355877) — 802.1X Controlled Directions enhancement. With this change, Administrators can use “Wake-on-LAN” with computers that are connected to ports configured for 802.1X authentication.

164