Software Fixes in Release M.08.51 - M.10.72

Release M.08.87

■SNMP (PR_1000295753) — Removing 'public' SNMP community generates an empty Event Log message.

Release M.08.87

Problems Resolved in Release M.08.87 (Not a general release)

■Crash/STP (PR_1000307280) — Inconsistent or incorrect STP data may cause the switch to crash with a message similar to:

Software exception at stp_mib.c:248 -- in 'mSnmpCtrl', task ID = 0x12d14b8\n-> ASSERT: failed.

■Menu (PR_1000306213) — When using the Menu to create a trunk, the new trunk ports will become disabled after a switch reboot.

■OSPF (PR_1000280427) — OSPF MD5 Authentication failure.

■RSTP (PR_1000309683) — Temporary routing or switching problems after RSTP is disabled.

Release M.08.88

Problems Resolved in Release M.08.88 (Not a general release)

■CLI (PR_1000310849) — Under a heavy load where packets received on a 10-Gigabit port are dropped, the RX drop counter values decrease when they should increase.

■LLDP (PR_1000310666) — The command "show LLDP" does not display information learned from CDPv2 packets.

■SNMP Traps (PR_1000285195) — Switch does not save the option to disable a Link up/ down SNMP trap after a switch reboot.

■Web /Stacking (PR_1000308933) — Added Web User Interface stacking support for the new Series 3500yl switches, providing a 3500yl "back-of-box" display when the 3400cl or 6400cl is stack commander and a 3500yl is a stack member.

Release M.08.89

Problems Resolved in Release M.08.89 (Never released)

■Enhancements (PR_1000313819) — Added two enhancements:

• DNS Names for Ping and Traceroute

155