Enhancements
Release M.10.04 Enhancements
ProCurve# show instrumentation | monitor configuration | ||
PARAMETER | LIMIT | ||
1000 (med) | |||
1000 (med) | |||
50 | (med) | ||
5 (high) | |||
100 | (med) | ||
100 | (med) | ||
10 | (med) | ||
100 | (low) | ||
10 | (med) | ||
10 | (med) |
SNMP trap generation for alerts: enabled
Instrumentation monitoring log : enabled
Figure 18. Viewing the Instrumentation Monitor Configuration
TCP/UDP Port ClosureIn earlier software releases, certain UDP ports were always open. Beginning with software release M.10.04, all TCP/UDP ports on the 3400cl switches will remain closed until the associated services are enabled on the switch.
The following ports and services are affected by this change:
PortService
69TFTP
161SNMP
520RIP
1507 | Stacking (SNMP) |
|
|
To open any of these ports, the respective services must first be enabled on the switch. For information on how to enable/disable these services, refer to the following command listings . For details on each service, refer to the latest version of the switch’s software documentation available on the ProCurve Networking Web site.
75