Enhancements

Release M.10.02 Enhancements

ProCurve#

show sflow agent

Version

 

1.3;HP;M.10.03

Agent Address

10.0.10.228

Figure 13. Viewing sFlow Agent Information

The show sflow destination command includes information about the management-station’s destination address, receiver port, and owner.

ProCurve# show sflow destination

sflow

Enabled

Datagrams Sent

221

Destination Address

10.0.10.41

Receiver Port

6343

Owner

admin

Timeout (seconds)

333

Max Datagram Size

1400

Datagram Version Support

5

Figure 14. Example of Viewing sFlow Destination Information

Note the following details:

■Destination Address remains blank unless it has been configured on the switch via SNMP.

■Datagrams Sent shows the number of datagrams sent by the switch agent to the manage- ment station since the switch agent was last enabled.

■Timeout displays the number of seconds remaining before the switch agent will automati- cally disable sFlow (this is set by the mangement station and decrements with time).

■Max Datagram Size shows the currently set value (typically a default value, but this can also be set by the management station).

The show sflow sampling-pollingcommand displays information about sFlow sampling and polling on the switch. You can specify a list or range of ports for which to view sampling information.

69