Enhancements
Release M.10.43 Enhancements
An example of the show ip source-lockdown status command output is shown in Figure 20. Note that the operational status of all switch ports is displayed. This information indicates whether or not dynamic IP lockdown is supported on a port.
ProCurve(config)# show ip source-lockdown status
Dynamic IP Lockdown (DIPLD) Information
Global State: Enabled
Port | Operational State |
-------- | ------------------ |
A1 | Active |
A2 | Not in DHCP Snooping vlan |
A3 | Disabled |
A4 | Disabled |
A5 | Trusted port, Not in DHCP Snooping vlan |
. . . . . . . . . . . . . .. |
Figure 20. Example of show ip source-lockdown status Command Output
Displaying the Static Configuration of IP-to-MAC Bindings
To display the static configurations of IP-to-MAC bindings stored in the DHCP lease database, enter the show ip source-lockdown bindings command.
Syntax: show ip source-lockdown bindings [<port-number>]
port-number(Optional) Specifies the port number on which source IP-to-MAC address and VLAN bindings are configured in the DHCP lease database.
An example of the show ip source-lockdown bindings command output is shown in Figure 21.