Software Fixes in Release M.08.51 - M.10.72

Release M.10.50 through M.10.64

Routed traffic is off by a factor of 1000

Switched traffic is not sampled at all

■

■

■

■

■

Security (PR_1000388616) — Possible cross-site scripting vulnerability in Web Management Interface.

Config (PR_1000763386) — An SNMPv3 user is not reflected in startup config as it should be. This is an additional fix for PR_1000750637.

CLI (PR_1000713515) — When the CLI command erase startup config is issued, the switch asks whether you want to save the config.

Transceivers (PR_1000467314) — Revision C mini-GBICs are being incorrectly displayed as revision B.

Crash (PR_1000471594) — Use of the CLI command show config <file> may cause the switch to crash with a message similar to the following.

TLB Miss: Virtual Addr=0x00000004 IP=0x80150828 Task='mSess1' Task

ID=0x85e48550 fp:0x85e47978 sp:0x85e478e0 ra:0x801507cc

sr:0x1000fc01

■Crash (PR_1000464612) — Booting from the secondary image, or some types of configu- ration file manipulation (for example, use of the CLI command erase start) may cause the switch to crash with a message similar to the following.

■

■

Software exception at ConfigTree.cc:508 -- in 'mChassCtrl'.

Tagged/Untagged VLANs (PR_1000759034) — Trunks may transmit tagged frames from

untagged VLANs.

QoS (PR_1000454194) — When using the Web Management interface to configure VLAN based QoS, the VLANs do not show up in the configuration window as selectable when applying a DSCP or QoS value.

■Web Auth (PR_1000380278) — After running for a period, the switch will get into a state in which it must be rebooted in order for the Web authentication page to load.

Release M.10.50 through M.10.64

Problems Resolved in Release M.10.50 - M.10.64 (Never Built)

Release M.10.65

Problems Resolved in Release M.10.65 (Not a Public Release)

177