Software Fixes in Release M.08.51 - M.10.72

Release M.10.07

■Stacking (PR_1000311510) — When stacking is enabled, a stack member cannot be ‘pinged’ using the stack number.

■STP (PR_1000335141) — The output of the 'show span' CLI command displays a numeral in the 'Type' column, as opposed to terms such as "10/100T".

■Enhancement (PR_1000309540) — Added support for the J8440B 10-GbE X2-CX4 Trans- ceiver.

■Web (PR_1000302713) — When using the web interface and a large amount of stacking interactions occur, portions of the information from the stack commander may no longer appear.

Release M.10.07

Problems Resolved in Release M.10.07

■Crash (PR_1000335747) — Execution of 'configtest' test mode command causes switch to crash with a message similar to:

Software exception at parser.c:7898. in 'mSess1', task ID = 0x16726c0 -> ASSERT: failed. Support: This is a test mode command.

■Enhancement (PR_1000340595) — Added support for PIM Dense Mode. For details, refer to Chapter 5, “PIM-DM (Dense Mode) on the 5300xl Switches” in the Advanced Traffic Management Guide for the ProCurve Series 6400cl/5300xl/4200vl/3400cl Switches.

■Menu (PR_1000319651) — The Save option on the "Internet (IP) Service" menu screen not working.

■Ping MIB (PR_1000311510) — If the DNS hostname given to ping was invalid (for example hp..com) the switch will crash with an “ASSERT in ip_util.c”.

■Transceiver (PR_1000310852) — 10gig LR port has excessive link toggles during bootup.

Release M.10.08

Problems Resolved in Release M.10.08

■CLI (PR_1000330553) — Garbage characters displayed in "show snmp-server" cli output.

160