Software Fixes in Release M.08.51 - M.10.72

Release M.08.78

Release M.08.78

Problems Resolved in Release M.08.78 (Not a general release)

■Enhancement (PR_1000291806) — Fast boot enhancement.

■MSTP (PR_1000286883) — Slow MSTP fail-over and fall-back time.

Release M.08.79

Problems Resolved in Release M.08.79 (Not a general release)

■Fault (PR_1000089786) — Chassis fault LED stops blinking after a new OS image was downloaded to the switch.

■Ports (PR_1000090867) — The dual personality ports (RJ-45 and mini-GBIC) lose state (running speed) after being hot swapped in or out.

■Enhancement (PR_100292455) — Rate display for ports on CLI. New command: "show interface port-utilization", not available on Menu nor Web Interface.

Release M.08.80

Problems Resolved in Release M.08.80 (Never released)

■RSTP (PR_1000297195) — The switch repeatedly flushes its MAC address table, resulting in intermittent flooding of all traffic.

Release M.08.81

Problems Resolved in Release M.08.81 (Not a general release)

■XRRP (PR_1000291250) — When a XRRP router is rebooted and activates its virtual MAC address, it incorrectly transmits ARP requests, which fails to update forwarding tables and ARP caches.

Release M.08.82

Problems Resolved in Release M.08.82 (Not a general release)

■Meshing (PR_1000300165) — Packets larger than 1482 bytes within a mesh will be reported as FCS receive errors and may generate excessive CRC error messages in the event log.

153