| Enhancements |
| Release M.08.89 Enhancements |
Event Log Messages |
|
|
|
Message | Meaning |
|
|
DNS server address not configured | The switch does not have an IP address configured for the DNS |
| server. |
DNS server not responding | The DNS server failed to respond or is unreachable. An incorrect |
| server IP address can produce this result. |
Unknown host < | The host name did not resolve to an IP address. Some reasons for |
| this occurring include: |
| • The host name was not found. |
| • The named domain was not found. |
| • The domain suffix was expected, but has not been configured. (If |
| the server’s IP address has been configured in the switch but the |
| domain name has not been configured, then the host’s fully |
| qualified domain name must be used.) |
|
|
In earlier software releases, SNMP MIB object access has not been available for switch authentication configuration (hpSwitchAuth) features. Beginning with software release M.08.89, the 3400cl and 6400cl switches allow, by default,
■number of primary and secondary login and enable attempts
■TACACS+ server configuration and status
■RADIUS server configuration
■selected 802.1X settings
■key management subsystem chain configuration
■key management subsystem key configuration
■OSPF interface authentication configuration
With SNMP access to the hpSwitchAuth MIB enabled, a device with management access to the switch can view the configuration for the authentication features listed above (excluding passwords and keys). Using SNMP sets, a management device can change the authentication configuration (including changes to passwords and keys). Operator read/write access to the authentication MIB is always denied.
35