Software Fixes in Release M.08.51 - M.10.72
Release M.10.70
■PC Phone/Authentication (PR_0000007209) — When an IP phone is used in tandem with a PC connected to the phone, if the phone is moved to a tagged VLAN, some phone manufactures send some traffic to the switch untagged. This may result in traffic disruption including the PC not being allowed to authenticate.
■CLI (PR_0000002815/1000406763) — Output from the
modified to include output from show
show tech CLI command was and show
■DHCP Snooping (PR_0000009387) — The
■PC Phone/Authentication (PR_0000010104) — When using an IP phone in tandem with a PC, sometimes the VLAN assignment after authentication of the PC is delayed.
■802.1X (PR_0000010275) — For a port that is being authenticated via 802.1X, the user fails authentication if the unauth vid value is configured.
■CLI (PR_0000010942) — The CLI command output for show run does not display aaa port- access <port#> when
■CLI (PR_0000010378) — Session time (sec.) remains at zero in response to the CLI command show
■Enhancement (PR_0000010783b) — The CLI output for the show tech transceivers command has been enhanced to be consistent with other platforms.
Release M.10.70
Problems Resolved in Release M.10.70 (Not a Public Release)
■Config (PR_0000007953) — The config line
■DHCP / DHCP Snooping (PR_0000008118) — Switches may be intermittently unable to get an IP address via DHCP after enabling DHCP snooping.
■Authentication (PR_0000012553) — The switch sends EAP supplicant packets with the identity field truncated to 24 bytes after a reload.
181