Clarity W-1000 manual Troubleshooting, Programming Personal Access Codes, Static On Line

Troubleshooting

Continued

E

Programming Personal

Access Codes

•Difficulty Programming Account Numbers

—Your TONE/PULSE selector must be switched to the TONE mode to enter account numbers.This is because most interactive phone systems require TOUCH TONE to operate. If your phone service is rotary service, you must have the switch set to PULSE to dial a number. Once you are connected move the switch to TONE and enter your responses using TOUCH TONE mode.When your call is complete move the switch back to PULSE so you are ready to make your next call.

Static On Line

•Interference From Household Appliances

—Your Clarity phone may be located near a touch lamp, microwave or

W-1000

refrigerator which may cause interfer- ence. Relocating your phone to another area may eliminate the problem.

—A cordless phone on your phone line may also cause static.Try discon- necting your cordless phone for several days.This may eliminate the problem.

•Interference From Malfunctioning, Frayed Or Poorly Connected Telephone Cords

—Check your phone cords and con- nections.Try interchanging cords with another phone. Replace any defective equipment.

Feedback Problems

•Feedback Occurs When Handset Is Set Down

—Avoid setting receiver on a hard surface or attach a foam receiver pad to earpiece of phone.You can also lay the receiver on its side.This will eliminate feedback also.

Page 21

N G L I S H

W1000_User_Guide 21 11/15/99, 9:38 PM