Features
Continued
E
NNote for Users with Pulse/Rotary
G | service only: Many automated answering | |
systems used by banks, stores and | ||
L | ||
government agencies ask you to “Push 1 for | ||
|
Iservice”,“Push 2 for the operator”, etc.You S must switch the tone/pulse switch on the
Htop edge of the phone to tone before responding to these prompts. In summary, dial the phone number you want to call in pulse mode, switch to tone mode to interact with the automated answering system, switch back to pulse mode when your call is done.When switching from Pulse to Tone during a call, there will be a 3 second delay from the time you first push a key in tone mode until the key press is transmitted.You cannot switch from tone to pulse during a call.
** * * * *
3.The phone will now dial in the mode you selected.
Last Number Redial
Last Number Redial allows you to automatically redial the last telephone number you called.This feature is convenient for redialing numbers which are busy.The phone number stored for redial will be reset with every new call you make.
To Operate Last Number
Redial:
Important: You must have tone signaling service to use the TONE feature on the Walker Clarity. If in doubt, contact your local telephone company.
To Set the TONE/PULSE
Switch:
1.Move the switch towards the correct setting.
2.Depress the hookswitch once.
Page 12
1.Depress the hookswitch to get a new dial tone.
2.Press the “Redial” Button once.
3.Stay on the line, and your call will be dialed.
The last number dialed will be stored in the Walker Clarity for you until you dial another number or disconnect the telephone from the wall jack.
W1000_User_Guide | 12 | 11/15/99, 9:38 PM |
