Installation
Continued
E
Warning: To prevent electrical shock, always remove the telephone line cord from the wall jack before removing the cord from the telephone. Never leave the line cord connected to the wall jack if it is not also connected to the telephone.
•Hold the Walker Clarity so that the holes on the mounting bracket line up
with the raised mounting pins on the modular wall jack. Once the holes are lined up, push the phone in towards the wall jack and then slide the phone downward until it is securely seated on the wall jack.
•Plug one end of the handset cord (coiled) into the bottom of the handset.
•Plug the other end of the handset cord into the jack located on the lower left edge of the Walker Clarity.
•Place the handset in the cradle of the Walker Clarity.The special tabs will hold it in place.
Switch
Tabs
N G L I S H
Walker Clarity® Features
Your Walker Clarity is packed with features that will help you improve your communications over the telephone.
Clarity Power Control®
The Clarity Power Control allows you to control the clarity of your phone conversations. It will let you hear clearly phone calls that are normally difficult to understand.The amplification will be
increased by more than 20 decibels (10 times) and the frequency band from 2000 to 3000Hz will be specially enhanced to improve the clarity of your call.
Clarity
Power
Control
Page 9
W1000_User_Guide | 9 | 11/15/99, 9:38 PM |
