Clarity W-1000 manual Trouble-Shooting Guide, Programming Problems, Can’t Dial Out, First Attempt

Trouble-Shooting Guide

E
N	Dialing Problems
G

L

I

S• Can’t Dial Out

H

—Make sure that TONE/PULSE switch is not set in the middle. Slide the switch fully to the left or the right.

—If you have the TONE/PULSE switch set to TONE, make sure that you have TouchTone service from your local phone company.

Programming Problems

•Can’t Store Numbers Into Memory

—Your new Clarity phone must charge for two (2) hours before you can program any numbers into it.

• Phone Doesn’t Dial Out On	• Loss Of Numbers
First Attempt	Programmed Into Memory

—Your phone may be at the end of a long line of phones, due to the way the phone company installed the wiring in your neighborhood. In this case, your phone may not get enough power from the phone line.Try waiting 3-5 seconds after lifting the handset before dialing the number.Wait for the sound level indicator to light solid before dialing.

—Your Clarity phone will maintain its memory for up to 12 hours during a power loss. If you unplug the phone from the telephone line for long periods or lose your phone service for an extended period of time you will need to reprogram the phone.

Page 20 W-1000

W1000_User_Guide 20 11/15/99, 9:38 PM