Operating the Walker Clarity®
E
N
G
L
I
S
H
Once you have installed your Walker Clarity according to the instructions noted previously, it will be ready to use.
To Place or Receive
aCall:
1.Adjust the Clarity Control to its lowest setting (zero).
2.Pick up the handset and listen for the caller’s voice or a dial tone.Watch the green sound level light located on the phone base, next to the program button. It will be bright and steady when a dial tone is present. It will flash in rhythm with a busy signal.
Page 14
The light will flicker when the person on the other end of the phone is talking.
3.When placing a call, dial as you would any phone and wait for someone to answer.
4.Adjust the Clarity Power Control upwards to a level where the other party’s voice is heard loud and clear, and begin conversation.
5.When you complete the call, return the handset to the base unit and slide the Clarity Power Control back down to its lowest setting (this will let other users adjust the Clarity Power Control to their level).
Note: If you made an error while dialing, just depress the hookswitch, listen for a dial tone, and dial again.
W1000_User_Guide | 14 | 11/15/99, 9:38 PM |
