Sterling 350-2100 CFM installation manual Switch

Display	Sensor Type	Switch	Temp
Characters		Position	Range
			°C	°F
	Thermocouple Type R	0	0 - 1,700	0 - 3,000
	Thermocouple Type S	1	0 - 1,700	0 - 3,000
	Thermocouple Type K	2	-200 to	-300 to
			1,300	2,300
	Thermocouple Type J	3	-100 to	-100 to
			900	1,600
	Thermocouple Type T	4	-200 to	-300 to
			400	700
	Thermocouple Type E	5	0 to 600	0 to 1,100
	Platinum RTD (JIS	6	-99.9 to	-99.9 to
	1981)		450.0	800.0
	Platinum RTD (DIN)	7	-99.9 to	-99.9 to
	Not Used	8	450.0	800.0
	Not Used	9

9. Set both transmission output selector DIP switches OFF. They are marked SW207 (TRANSFER)
and are on the right circuit board on controls equipped with optional communications. See the
Communications Manual [part number A0535959].
ON
1	2	3	4	5	6
10. The function selector DIP switch [SW201 (FUNCTION)] selects 6 control modes. It is on the right
circuit board. Put this switch in the set-up configuration at right while inputting the initial control
parameters.

		SW201 Set-up Configuration
	1	OFF	Control Mode
	2	OFF	Normal/Reverse Output
	3	OFF	Input Shift
	4	OFF	Temperature Sensor
			Standard
	5	ON	Scale Indication
	6	ON	PID Constant Indication
350-2100 cfm Dryers			Chapter 6: Maintenance	43 of 58