Chapter 5: Startup, Shutdown & Operation

5-1 Pre-Startup Checks

;Check the process and return hoses for tight connections.

;Check that all companion equipment, such as the drying hopper, loading system and aftercooler are ready for operation.

;Check the dryer electrical connections.

Note: Clean the rust-preventive oil from inside the drying hopper. Failure to clean the hopper will cause fouling of the desiccant in the dryer, and will void the warranty.

5-2 Startup

Close the slidegate at the bottom of the drying hopper.

1.Fill the drying hopper with material.

2.Turn on (energize) the disconnect switch in your power drop, then turn on the one on the dryer.

3.Flip the on/off switch to "ON."

4.Press the stop/start button.The blowers should start, and the proper control panel indicators should light.

5.Make sure both blowers are turning the right direction. Verify rotation direction is correct. If one or both blowers do not start:

•Check to see if an overload on the blower motor starter has tripped. If so, set it properly and reset. Check the blower fuses, too.

•If one of the optional Valve Position Error lights is lit, the blowers will not start. Make sure the valve arm has tripped the proper limit switch. If the electric actuator is not fully extended or retracted, check the line fuse (8FU) near the actuator's 24 VDC power supply.

The valve actuator has built-in limit switches to shut off its motor.

It must fully extend and retract to prevent the motor from burning out.

•If a blower failure light is lit after the blower has run for a few seconds and shut down, the blower pressure switch will need to be adjusted until the failure light goes out.

The pressure switches at the rear of the dryer were adjusted during factory-testing. Pressure changes in the drying system as installed may make some adjustment to these necessary during initial startup.

350-2100 cfm Dryers

Chapter 5: Startup, Shutdown & Operation

27 of 58

Page 26 Page 28
Page 27
Image 27
Sterling 350-2100 CFM installation manual Startup, Shutdown & Operation, Pre-Startup Checks
Page 26 Page 28

350-2100 CFM specifications

The Sterling 350-2100 CFM is a high-performance ventilation system that effectively addresses the needs of various industrial and commercial applications. This versatile unit is designed to provide optimal air movement, offering flow rates spanning from 350 to 2100 cubic feet per minute (CFM). Its capabilities make it ideal for environments that require robust air circulation, such as warehouses, factories, and workshops.

One of the standout features of the Sterling 350-2100 CFM is its energy-efficient motor. The unit is equipped with a reliable and durable drive system, allowing for lower energy consumption while maintaining high performance. This not only reduces operational costs but also contributes to a greener footprint, making it an attractive option for businesses looking to enhance sustainability.

The ventilation system is designed with an advanced aerodynamic blade technology that maximizes airflow and minimizes noise levels. This allows for a more comfortable working environment by reducing the disruption typically associated with high-velocity air movement. Additionally, the integrated sound-dampening features ensure that it operates quietly, making it suitable for noise-sensitive areas.

The Sterling 350-2100 CFM also incorporates a user-friendly control panel, which allows for easy adjustments and monitoring of airflow levels. This system can be tailored to specific ventilation requirements, ensuring optimal performance in diverse settings. For added convenience, some models come with remote control capabilities, allowing operators to manage airflow from a distance.

Durability is a key characteristic of the Sterling 350-2100 CFM. The unit is constructed with high-grade materials that resist wear and tear, providing long-lasting service even in challenging environments. The weather-resistant design further enhances its suitability for outdoor applications.

Moreover, the system can be easily integrated with existing HVAC setups, providing flexibility and compatibility without extensive modifications. Maintenance is also simplified, with easily accessible components for routine checks and servicing.

In summary, the Sterling 350-2100 CFM ventilation system stands out for its combination of energy efficiency, quiet operation, and robust design. With its innovative technologies and user-friendly features, it meets the demands of modern industrial and commercial spaces while ensuring optimal air quality and comfort for occupants.
Top Page Image Contents