LEVEL 1
In this level, the four setpoints can be changed, plus Hysteresis, Input Shift and Security Protection can be set.
Use 
to move from one parameter to the next.
When the desired parameter appears
on the LED display, press 
to select that parameter for program- ming. The parameter’s current value appears on the LED display.
When the desired parameter is
displayed, use 
and 
to view and/or change the parameter. Then
press 
to save the new setting to memory, and to move on to the next parameter.
Setpoints - 
Setpoints
Hysteresis
Input Shift
Security Protection
When 
appears on the LED display, the HH, H, L, and LL setpoints can be changed even while security lockout is enabled.
To set the values, press 
after 
appears. The present value for the HH setpoint will appear
on the LED display. Use 
and 
to view and/or change the setpoint. Then press 
to save the new setting to memory, and to move on to the next setpoint. After all setpoints are set, the LED display
returns to 
.
Hysteresis - 
The hysteresis value for the setpoints can range from 0° to 99° C or F.
Press 
after 
appears on the LED display. Use 
and 
to set the value. Then press 
to save the new setting to memory.
Input Shift - 
The input shift value can range from
The input shift value offsets the displayed temperature by the value you set here. This may be useful to force the regeneration monitor to display the same temperature as a known [or supposed] temperature reading.
Chapter 6: Maintenance | 49 of 58 |
