Yamaha CRW-F1-NB Install the CRW-F1 Drive, Installing the CRW-F1 drive as an additional drive

Preparing the CRW-F1 Drive

3 Install the CRW-F1 Drive

The following describes how to install the CRW-F1 drive as an additional drive for example.

1 Prepare to install.

Installing the CRW-F1 drive as an additional drive

Remove the front cover from the 5 ¼-inch drive bay.

Replacing

Remove all cables connected to the CD-ROM or other devices to be replaced. Then remove the device itself from the computer.

Audio cable

IDE cable	4-pin internal power
	cable

Note

•Be careful not to damage the various cables connected to the rear panel of the CD-ROM drive.

•The audio cable is usually caught by the hook at the top of the connector. Release the hook and remove the connector without using excessive force.

•Do not apply excessive force to the CD-ROM drive or cables.

•Hold the cable by the connector to remove the cable. Pulling the cable itself with excessive force may damage the wires inside.

17