Manuals / Yamaha / Home Audio / CD Player

Yamaha CRW-F1-NB manual Analog connection

Models: CRW-F1-NB

1 54

Download 54 pages 45.77 Kb

Page 29

Analog connection

Connect one end of the audio cable (the end with one connector) to the analog audio output jack on the rear panel of the CRW-F1 drive. Be sure that the connector is in the correct direction prior to connecting it.

There are two types of connectors at the other end of the audio cable. Select the one that fits the sound card: Vertical connector (PH) and Horizontal connector (MPC). Use only one of the two connectors, and leave the other free. Check the direction of the connector prior to connecting it to the sound card.

Analog audio output jack

Left channel (L)

Ground (G)

Right channel (R)

Vertical connector (PH)

Audio cable

Horizontal connector (MPC)

Sound card

Audio input jack

Note

Some sound cards have more than one audio input jack, including those which do not support the specification of the CRW-F1 drive. If playback audio cannot be heard from the speakers, refer to the instruction for the sound card.

Continued on next page

20

Image 29

Yamaha CRW-F1-NB manual Analog connection

Contents

Page FCC Information U.S.A Achtung Page English Safety Precautions Iii Precautions for Transportation WarrantyTable of Contents DiscT@2 Features of the CRW-F1 DriveHigh speed writing/reading SafeBurn Enhanced stability writing technologyFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelHandling Discs Precautions on UseCopyright Disclaimer of IndemnityRecordable disc type Compatible DiscsDisc shape High Speed CD-RW discs CD-RW discsWriting/Rewriting speed Ultra Speed CD-RW discs Computer PC/AT compatible System RequirementsImage file Operating systemSerial Number Preparing the CRW-F1 DrivePreparing tools Serial NumberTurn off and unplug the computer Decide the Installation MethodReplacing an existing IDE device with the CRW-F1 drive Example 1 As a secondary slave For additional drive Examples of connecting the CRW-F1 driveEnhanced-IDE E-IDE Preparing the CRW-F1 DrivePage Set the Jumper Switch Cable Select Csel Replacing Install the CRW-F1 DriveInstalling the CRW-F1 drive as an additional drive Connect a 40-pin IDE cable Audio CD playback Connect an audio cable if necessaryAnalog connection Digital connection Top Power connector Bottom For Windows XP Check Recognition of the CRW-F1 DriveFor Windows 95/98/98 Second Edition/Me If the drive name is not shown or there is or markFor Windows 2000 Professional For Windows XP/2000 Professional Direct Memory Access DMA Install CD Writing SoftwareRecommended DMA settings transfer mode settings Loading/Ejecting a Disc Manually Ejecting a Disc CRW-F1 drive is not recognized by the operating system. P TroubleshootingIs the IDE cable connected properly to the CRW-F1 drive? Is the IDE cable connected properly to the motherboard?Is the disc tray opened when the computer is restarted? Disc tray does not open when you press the eject buttonIs each IDE device set respectively? Is the CRW-F1 drive recognized by the operating system? PNo data can be read from a disc Playback of an audio CD CD-DA is inaudible Check that the volume is not set to the minimum levelFor Windows Me TroubleshootingOther problems Error message Buffer Underrun is displayedFor Windows XP Is the power capacity of your computer sufficient?Checking the firmware version in your CRW-F1 drive FirmwareSupported Formats Write Read Play back *4 CRW-F1 Drive SpecificationsData Transfer Rate Mode CRW-F1 drive conforms to the following specifications CRW-F1 Drive Specifications Safety/EMC ComplianceBuffer Underrun Protection Function Technical NotesWriting Methods Disc-at-Once DAOPacket Writing Technical Notes Session-at-Once SAOPartial CAV Constant Linear Velocity CLVConstant Angular Velocity CAV Page Canada