Manuals / Yamaha / Home Audio / CD Player

Yamaha CRW-F1-NB manual

Models: CRW-F1-NB

1 54

Download 54 pages 45.77 Kb

Page 23

The master/slave settings for general IDE devices are as follows.

•Hard drive: Change the setting with the jumper switch on the circuit board on the rear panel or the hard drive bottom panel. The cable select (CSEL) setting is required for some hard drives.

•CD-ROM drive, etc.: Change the setting with the jumper switch on the rear panel.

Note

Assign each IDE device to master or slave respectively when two IDE devices are connected to one IDE cable. Connect the IDE device to the end of the IDE cable when the device is set to master, or connect it to the middle of the cable when it is set to slave.

14

Image 23

Yamaha CRW-F1-NB manual

Contents

Page FCC Information U.S.A Achtung Page English Safety Precautions Iii Precautions for Transportation WarrantyTable of Contents SafeBurn Enhanced stability writing technology Features of the CRW-F1 DriveDiscT@2 High speed writing/readingFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelDisclaimer of Indemnity Precautions on UseHandling Discs CopyrightRecordable disc type Compatible DiscsDisc shape High Speed CD-RW discs CD-RW discsWriting/Rewriting speed Ultra Speed CD-RW discs Operating system System RequirementsComputer PC/AT compatible Image fileSerial Number Preparing the CRW-F1 DriveSerial Number Preparing toolsTurn off and unplug the computer Decide the Installation MethodReplacing an existing IDE device with the CRW-F1 drive Example 1 As a secondary slave For additional drive Examples of connecting the CRW-F1 driveEnhanced-IDE E-IDE Preparing the CRW-F1 DrivePage Set the Jumper Switch Cable Select Csel Replacing Install the CRW-F1 DriveInstalling the CRW-F1 drive as an additional drive Connect a 40-pin IDE cable Audio CD playback Connect an audio cable if necessaryAnalog connection Digital connection Top Power connector Bottom For Windows XP Check Recognition of the CRW-F1 DriveFor Windows 95/98/98 Second Edition/Me If the drive name is not shown or there is or markFor Windows 2000 Professional For Windows XP/2000 Professional Direct Memory Access DMA Install CD Writing SoftwareRecommended DMA settings transfer mode settings Loading/Ejecting a Disc Manually Ejecting a Disc Is the IDE cable connected properly to the motherboard? TroubleshootingCRW-F1 drive is not recognized by the operating system. P Is the IDE cable connected properly to the CRW-F1 drive?Is the CRW-F1 drive recognized by the operating system? P Disc tray does not open when you press the eject buttonIs the disc tray opened when the computer is restarted? Is each IDE device set respectively?No data can be read from a disc Playback of an audio CD CD-DA is inaudible Check that the volume is not set to the minimum levelFor Windows Me TroubleshootingOther problems Error message Buffer Underrun is displayedFor Windows XP Is the power capacity of your computer sufficient?Checking the firmware version in your CRW-F1 drive FirmwareSupported Formats Write Read Play back *4 CRW-F1 Drive SpecificationsData Transfer Rate Mode CRW-F1 drive conforms to the following specifications CRW-F1 Drive Specifications Safety/EMC ComplianceDisc-at-Once DAO Technical NotesBuffer Underrun Protection Function Writing MethodsPacket Writing Technical Notes Session-at-Once SAOPartial CAV Constant Linear Velocity CLVConstant Angular Velocity CAV Page Canada