![](/images/new-backgrounds/1047437/4743785x1.webp)
6 No data can be read from any CDs, a disc is ejected spontaneously, or the LED does not light when a disc is inserted. (The LED does not change to blinking blue and then lighting blue.) (P. 2)
Remove the IDE cable from the
If the drive does not accept any compatible discs (and the LED does not light), contact the store of purchase or your nearest Yamaha dealer (listed at the back of this manual).
7 The error message “Buffer Underrun” is displayed.
If your CD writing software supports Buffer Underrun Protection, it is required to be activated. For more details, refer to the instruction for the CD writing software.
To prevent the occurrence of a buffer underrun and to increase the efficiency of data writing, try the following:
–Reduce the data writing speed.
–Create an image file on the hard drive.
–Optimize the hard drive. (Defragmentation)
–Do not start any application software including screen savers during data writing.
–Deactivate the power management for the hard drive.
–Set the data transfer mode of any IDE device such as a hard drive or
–Deactivate Windows Active Desktop.
–Quit all
–Check your CD writing software settings with the instruction for it.
Note
A writing error may happen if the drive is vibrated while data is being written on a
8 Other problems
●Is more than one CD writing software installed on your computer?
Installing more than one CD writing software on a computer may cause instability of operation.
Continued on next page
34