GE JTD915 Installation of the warming drawer, Before You Begin, Product Dimensions, 27 ″ Drawer

Safety Instructions

Installation of the warming drawer.

Read these instructions completely and carefully.

Before You Begin

Operating Instructions

IMPORTANT: Save these instructions for the local electrical inspector’s use.

IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.

NOTE TO INSTALLER: Leave these instructions with the appliance after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual and Installation Instructions for future use.

NOTE: This appliance must be properly grounded.

NOTE: Insure that the power cord does not contact the hot surfaces on the bottom of ovens, cooktops, or any other appliance.

Product Dimensions

27″ 231⁄4″

9″

1″ 261⁄4″

Including handle

101⁄2″

A

Dimension A

27 ″ Drawer	30 ″ Drawer
26 3⁄4 ″	30 ″

Troubleshooting Tips Installation Instructions Care and Cleaning

Custom Panel Kits

ZXD27B—This kit provides for the installation of a custom front panel on 27″ wide models.

ZXD30B—This kit provides for the installation of a custom front panel on 30″ wide models.

Tools Needed

Consumer Support

■2 x4 or 2 x 2 lumber for runners and brace

■Wood screws and adhesive or other hardware for installing runners or shelf to support warmer drawer.

Runners must be level, rigidly mounted and capable of supporting 150 pounds.

■Saw

■Level

■Drill and 1/16″ bit

■Phillips screwdriver

10