HP J7949E manual Other Settings, Snmp Settings 2, Utilities may not operate properly

Table 4.4	SNMP Settings (2 of 2)
Item		Description
Disable SNMPv1/v2		This option disables the SNMP v1/v2c agents on the print
		server, which is recommended for secure environments. If
		SNMP v1/v2c is disabled, some port monitors or discovery
		utilities may not operate properly.
Enable SNMPv3		(Full-featured HP Jetdirect print servers only) This option
		enables (check) or disables (clear) the SNMP v3 agent on
		the print server.
		When enabled, an SNMP v3 account must be created on
		the print server, and the account information must be
		implemented on the SNMP v3 management application.
		You may create an account by providing the following
		information:
		User Name: the SNMP v3 account user name.
		Authentication Key: a 16-byte hexadecimal value for
		authenticating the SNMP packet contents using Message
		Digest Algorithm 5 (MD5, RFC 1321) .
		Privacy Key: a 16-byte hexadecimal value for encrypting
		the data portion of the SNMP packet using the Data
		Encryption Standard (DES) algorithm.
		Context Name: the view context in which this user can
		access SNMP objects. It is always “Jetdirect”.

Other Settings

This item provides access to a variety of management and printing configuration options. The following tabs are provided:

●Misc. Settings: for enabling miscellaneous advanced protocols and functions

●Firmware Upgrade: (for print servers that support firmware upgrades) to update your HP Jetdirect print server with new features and enhancements

●LPD Queues: for setting up print queues used in printing under LPD (line printer daemon) printing services

●Support Info: to set up the Support link located under Other Links in the left margin

●Refresh Rate: to set the time interval (in seconds) for embedded Web diagnostic page updates

ENWW Using the Embedded Web Server 103