HP J7949E manual Telnet Commands and Parameters 5, Command Description

Table 3.4 Telnet Commands and Parameters (5 of 13)

defaultq	Name of the queue to be used if the queue specified for a
	print job is unknown. By default, the default queue is AUTO.
addstring	Adds a user-defined character string that may be prepended
	or appended to print data. Up to eight character strings may
	be specified. A string name and the character string contents
	are specified in the addstring command line.
deletestring	Deletes a user-defined string. The string name is specified
	in the deletestring command line.
TCP/IP Raw Print Ports
Command	Description
raw-port	Specifies additional ports for printing to TCP port 9100. Valid
	ports are 3000 to 9000, which are application-dependent.
	Up to two ports can be specified.
TCP/IP Access Control
Command	Description
allow	Makes an entry into the host access list stored on the
	HP Jetdirect print server. Each entry specifies a host or
	network of hosts that are allowed to connect to the printer.
	The format is “allow netnum [mask]” where netnum is a
	network number or host IP address, and mask is an address
	mask of bits applied to the network number and host address
	to verify access. Up to 10 access list entries are allowed. If
	there are no entries, all hosts are permitted access. For
	example,
	allow 192.0.0.0	255.0.0.0
	allows hosts on network 192.
	allow 192.168.1.2
	allows a single host. In this case, the default mask
	255.255.255.255 is assumed and is not required.
	allow 0 clears the host access list.
	For additional information, see Chapter 1.
TTCP/IP Other
Command	Description
syslog-config	Enables or disables syslog server operation on the print
	server: 0 disables, 1 (default) enables. (UDP port 514)
syslog-svr	The syslog server’s IP address in dotted notation. It specifies
	the server that the HP Jetdirect print server sends syslog
	messages to. For example,
	syslog-svr: 192.168.40.1
	assigns 192.168.40.1 as the IP address of that server.
	For more information, see Appendix A.

ENWW TCP/IP Configuration 77