HP J7949E manual IPX/SPX Settings 1

CAUTION If you are using direct-mode printing over IPX/SPX on a Microsoft network, do not disable IPX/SPX.

For a Novell NetWare network:

●The embedded Web server may be used to select Queue Server Mode parameters in a Novell Directory Services (NDS) environment.

●You cannot create the NDS print server, printer, and queue objects using the embedded Web server. To create these objects, use other available tools or utilities.

Table 4.2	IPX/SPX Settings (1 of 2)
Item		Description
IPX/SPX Enable		Enables or disables the IPX/SPX protocols on the HP Jetdirect
		print server. If the checkbox is empty, IPX/SPX is disabled.
IPX/SPX Frame		Specify the IPX/SPX frame type to be used by the HP Jetdirect
Type		print server on your network. After a frame type has been
		configured, all others will be counted and discarded.
		● AUTO (default) senses all frame types and configures the first
		one detected.
		● EN_8023 limits the frame type to IPX over IEEE 802.3 frames.
		● EN_II limits the frame type to IPX over Ethernet frames.
		● EN_8022 limits the frame type to IPX over IEEE 802.2 with
		IEEE 802.3 frames.
		● EN_SNAP limits the frame type to IPX over SNAP with
		IEEE 802.3 frames.
SAP Interval		Specifies the time interval (in seconds) that the HP Jetdirect
		print server waits to send Service Advertising Protocol (SAP)
		messages, which are broadcast to advertise its service
		capabilities on a Novell NetWare network. To disable SAP
		messages, use the value “0”.
Print Server Name		Specify a NetWare printer name for the HP Jetdirect print server
		(alphanumeric characters only). The default name is NPIxxxxxx,
		where xxxxxx are the last six digits of the HP Jetdirect print
		server's LAN hardware (MAC) address.

ENWW Using the Embedded Web Server 99