access. However, the print server may be configured to appear as a secure site using an installed X.509-compliant certificate for identification. When properly configured, encrypted browser communications through HTTPS (secure HTTP) may be used for secure access.

Although not recommended, you can use your Internet Options menu to configure your browser to ignore security warnings if the print server is configured to operate through HTTPS. See Mgmt. Protocols.

4. An embedded Web server page will be displayed.

Operating Notes

If you enter or change a configuration parameter value, click Apply to enable your change, or click Cancel to erase your change.

Changes to the IP address will close the connection to the embedded Web server. To re-establish a connection, use the new IP address.

CAUTION Changes to the IP address on the HP Jetdirect print server may result in printing failures for clients that have been configured to print to this printer using the previous IP address.

Novell NetWare networks: On the Network Settings page, use the IPX/SPX tab to configure Novell Directory Services (NDS) Queue Server mode parameters. Note that the embedded Web server cannot create NDS objects (print server, printer, and print queue objects) on the Novell server. To create these objects, use a Novell NetWare utility, such as NWAdmin, or configure the IPX/SPX stack for NDS through HP utilities, such as the HP Install Network Printer Wizard or HP Web Jetadmin.

ENWW

Using the Embedded Web Server 94

Page 94
Image 94
HP J7949E manual Operating Notes