HP J7949E manual Telnet Commands and Parameters 13, Other Command Description, 10FULL, 10HALF

Table 3.4 Telnet Commands and Parameters (13 of 13)

Other

Command	Description
link-type	(10/100 Fast Ethernet) Sets the print server’s link speed (10
	or 100 Mbps) and communication mode (Full- or
	Half-Duplex). Selections are AUTO, 100FULL, 100HALF,
	10FULL, 10HALF.
	For AUTO (default), the print server uses autonegotiation to
	determine the link speed and mode. If autonegotiation fails,
	then 100HALF is set.
laa	Specifies a locally administered address (LAA) that replaces
	the factory-assigned LAN Hardware (MAC) address. If LAA
	is used, a user-specified string of exactly 12 hexadecimal
	digits must be entered.
	For Ethernet print servers, the LAA address must start with
	hexadecimal X2, X6, XA, or XE, where X is any hexadecimal
	digit 0 through F.
	The default address is the factory-assigned address.
scan-idle-timeout	Specifies the number of seconds (1 - 3600) that an idle scan
	connection is allowed to remain open. 0 disables the
	timeout. The default is 300 seconds.
MFP-config	(MFP config) Enable or disable print server support of the
	client software provided with your multifunction or all-in-one
	peripheral.
	0 (default): disables client software support (allows printing
	only).
	1: enables client software support (allows printing and
	scanning).
Support
Command	Description
Web JetAdmin URL	(Read-only parameter) If HP Web Jetadmin discovers this
	device, the URL to access HP Web Jetadmin will be
	specified.
Web JetAdmin	(Read-only parameter) If HP Web Jetadmin discovers this
Name	device, the name of the HP Web Jetadmin host will be
	specified (if known).
support-name	Typically used to identify the name of a person to contact for
	support of this device.
support-number	Typically used to specify a phone or extension number to
	call for support of this device.
support-url	A Web URL address for product information on this device
	over the Internet or an intranet.
tech-support-url	A Web URL address for technical support over the Internet
	or an intranet.

ENWW TCP/IP Configuration 85