HP J7949E Table B.1 HP Jetdirect Control Panel Menu 1, Menu Item Options Description of settings

Table B.1 HP Jetdirect Control Panel Menu (1 of 7)

Menu Item	Options	Description of settings
TCP/IP	ENABLE	● ON: Enable the TCP/IP protocol
		● OFF: Disable the TCP/IP protocol
	HOST NAME	An alphanumeric string, up to 32 characters,
		used to identify the device. This name is
		listed on the Jetdirect configuration page.
		The default host name is NPIxxxxxx, where
		xxxxxx is the last six digits of the LAN
		hardware (MAC) address.
	CONFIG METHOD	Specifies the method that TCP/IP
		parameters will be configured on the
		Jetdirect print server.
		● BOOTP: Use BootP (Bootstrap Protocol)
		for automatic configuration from a BootP
		server.
		● DHCP: Use DHCP (Dynamic Host
		Configuration Protocol) for automatic
		configuration from a DHCP server. If
		selected and a DHCP lease exists, DHCP
		RELEASE and DHCP RENEW menus
		will be available to set DHCP lease
		options.
		● AUTO IP: Use automatic link-local IP
		addressing. An address in the form
		169.254.x.x will be automatically
		assigned.
		● MANUAL: Use the MANUAL SETTINGS
		menu to configure TCP/IP parameters.
	DHCP RELEASE	This menu appears if CONFIG METHOD
		was set to DHCP and a DHCP lease for the
		print server exists.
		● NO (default): The current DHCP lease is
		saved.
		● YES: The current DHCP lease along with
		the leased IP address are released.
	DHCP RENEW	This menu appears if CONFIG METHOD
		was set to DHCP and a DHCP lease for the
		print server exists.
		● NO (default): The print server does not
		request to renew the DHCP lease.
		● YES: The print server requests to renew
		the current DHCP lease.

ENWW The HP Jetdirect Control Panel Menu 215