HP J7949E manual NetWare Systems, To Discontinue Dhcp Configuration

address for your HP Jetdirect-connected printer is available on the HP Jetdirect configuration page.)

d.Under “Supported types”, select DHCP only, then click Add. (Note: Selecting Both or BOOTP only will result in a configuration through BOOTP due to the sequence in which HP Jetdirect print servers initiate configuration protocol requests.)

e.Specify another reserved client, or click Close. The reserved clients added will be displayed in the Reservations folder for this scope.

12.Close the DHCP manager utility.

NetWare Systems

NetWare 5.x servers provide DHCP configuration services for network clients, including the HP Jetdirect print server. To set up DHCP services on a NetWare server, refer to Novell documentation and support.

To Discontinue DHCP Configuration

CAUTION Changes to an IP address on your HP Jetdirect print server may require updates to printer or system printing configurations for clients or servers.

If you do not want your HP Jetdirect print server configured through DHCP, you must reconfigure the print server to use a different configuration method.

1.If you use the printer control panel to set Manual or BOOTP configuration, then DHCP will not be used.

2.You can use Telnet to set Manual (status indicates “User Specified”) or BOOTP configuration, then DHCP will not be used.

3.You can manually modify the TCP/IP parameters through a supported Web browser using the Jetdirect embedded Web server or HP Web Jetadmin.

ENWW TCP/IP Configuration 62