HP J7949E manual Tags Supported in a BOOTP/DHCP Boot file 3

Table 3.1	Tags Supported in a BOOTP/DHCP Boot file (3 of 4)
Item		RFC	Description
		2132
		Option
tv		59	DHCP T2 timeout, specifying the DHCP lease rebind time
			(seconds).
T69		69	The IP address (in hexadecimal) of the preferred outgoing
			e-mail SMTP (Simple Mail Transport Protocol) server, for
			use with supported Scan devices.
T144		--	An HP-proprietary tag that specifies the relative path name
			of the TFTP configuration file. Long path names may be
			truncated. The path name must be in double quotes (for
			example, “pathname”). For file format information, refer to
			“TFTP Configuration File Entries“.
			Note: Standard BOOTP option 18 (extensions file path)
			also allows a standard tag (ef) to specify the relative path
			name of the TFTP configuration file.
T145		--	Idle Timeout option. An HP-proprietary tag to set the idle
			timeout (seconds), which is the amount of time that a print
			data connection may remain idle before being closed. The
			range is 1 - 3600 seconds.
T146		--	Buffer Packing option. An HP-proprietary tag to set buffer
			packing for TCP/IP packets.
			0 (default): Normal data buffers are packed before sending
			to the printer.
			1: Disable buffer packing. Data is sent to the printer
			when received.
T147		--	Write Mode option. An HP-proprietary tag that controls the
			TCP PSH flag setting for device-to-client data transfers.
			0 (default): disables this option, flag not set.
			1: all-push option. The push bit is set in all data packets.
			2: eoi-push option. The push bit is set only for data packets
			that have an End-of-Information flag set.
T148		--	IP Gateway Disable option. An HP-proprietary tag to
			prevent configuration of a Gateway IP address.
			0 (default): allows an IP address.
			1: prevents a Gateway IP address to be configured.

ENWW TCP/IP Configuration 41