Table 4.5

Miscellaneous Settings (3 of 4)

Item

 

Description

 

 

 

Dynamic Raw

 

Allows additional ports to be specified for printing to TCP port

Port Setting

 

9100. Valid ports are 3000 to 9000, which are

 

 

application-dependent.

 

 

Disable listening

For security purposes, two fields allow you to disable services on

on these ports

the printer that use the network. In each field, you must specify

 

 

the port numbers that are used for network communications with

 

 

those services. Up to five ports may be specified in each field (for

 

 

example, [5, 10, 40, 20, 50]). The valid range for port numbers is

 

 

1 through 65535.

 

 

Streams: In this field, enter port numbers of services that pass

 

 

data streams. Data streams use Transport Control Protocol

 

 

(TCP) to guarantee data delivery.

 

 

Datagrams: In this field, enter port numbers of services that pass

 

 

datagrams. Datagrams, typically used for broadcast messages,

 

 

use the User Datagram Protocol (UDP), a connectionless

 

 

protocol where delivery and error recovery are not guaranteed.

 

 

Enable MFP and

Enable or disable the print server’s support of the full-function

AIO software

 

scanning facility installed on client computers through software

support

 

supplied with the HP multifunction device (MFP or All-in-One).

 

 

If disabled, the print server will not allow client software device

 

 

functions other than network printing.

 

 

mDNS Service

Specifies an alphanumeric string of up to 64 ASCII characters

Name

 

assigned to this device or service. This name is persistent and is

 

 

used to resolve a particular device or service if socket information

 

 

(such as the IP address) changes from session to session. Apple

 

 

Rendezvous will display this service. The default service name

 

 

is the printer model and the LAN Hardware (MAC) address.

 

 

mDNS Domain

(Read-only parameter) Specifies the mDNS domain name

Name

 

assigned to the device, in the form <host name>.local. If a

 

 

user-specified host name has not been assigned, the default host

 

 

name NPIxxxxxx is used, where xxxxxx are the last 6 digits of the

 

 

LAN hardware (MAC) address.

 

 

 

ENWW

Using the Embedded Web Server 106

Page 106
Image 106
HP J7949E manual Miscellaneous Settings 3