HP J7949E manual AppleTalk Protocol Information, AppleTalk Configuration Information

AppleTalk Protocol Information

Information in this section of the Jetdirect configuration page (Ethernet Only) is described in Table 9.7. For error messages, see Table 9.9.

Table 9.7	AppleTalk Configuration Information
Message		Description
STATUS:		Indicates the current AppleTalk configuration status.
		READY: Indicates the HP Jetdirect print server is awaiting
		data.
		DISABLED: Indicates that AppleTalk was manually
		disabled.
		INITIALIZING: Indicates that the print server is registering
		the node address or name. An additional status message
		may also be displayed.
		An error code and message is displayed if the print server
		is not ready. For more information, see Table 9.9.
NAME:		The name of the printer on the AppleTalk network. A
		number after the name indicates that there are multiple
		devices with this name, and this is the Nth instance of the
		name.
ZONE:		The name of the AppleTalk network zone on which the
		printer is located.
TYPE:		The type of the printer being advertised on the network.
		Two types can be displayed.
NETWORK		NETWORK NUMBER: Identifies the AppleTalk Network
NUMBER:		Number on which the HP Jetdirect print server is currently
		operating.
NODE NUMBER:		NODE NUMBER: Identifies the AppleTalk Node Number
		that the print server chose for itself as part of its
		initialization sequence.
		Note: The AppleTalk phase 2 (P2) parameter is
		preconfigured on the HP Jetdirect print server.

ENWW HP Jetdirect Configuration Page 193