HP J7949E manual Other Protocols 2, Enable Device, Multicast IPv4

Table 4.9	Other Protocols (2 of 2)
Item		Description
Enable Device		Enable or disable device discovery protocols supported by
Discovery		the print server:
		SLP (Service Location Protocol).
		If enabled (checked), the HP Jetdirect print server
		sends SLP packets, which are used by system
		applications for automated discovery and installation.
		If disabled (cleared), SLP packets are not sent.
		mDNS (multicast Domain Name System).
		If enabled (checked), Multicast Domain Name System
		(mDNS) services are provided. mDNS is typically used
		on small networks for IP address and name resolution
		(through UDP port 5353) where a conventional DNS
		server is not used.
		Multicast IPv4.
		If enabled (checked), the print server will send and
		receive IP version 4 multicast packets.
Enable Management		Enable or disable Telnet access and the use of FTP to
Protocols		upgrade firmware on the print server. Telnet and FTP are
		not secure protocols and device passwords may be
		intercepted.
		Enable or disable RCFG, a remote IPX configuration
		protocol used by older management tools to configure
		Novell NetWare parameters. Disabling RCFG does not
		affect direct mode printing using IPX/SPX.
		Disabling Telnet, FTP firmware upgrades, and RCFG is
		recommended.

ENWW Using the Embedded Web Server 129