HP J7949E IPX/SPX Protocol Information, IPX/SPX Configuration Information 1, Primary Frame, Type

IPX/SPX Protocol Information

Information in this section of the Jetdirect configuration page is described in Table 9.5. For error messages, see Table 9.9.

Table 9.5 IPX/SPX Configuration Information (1 of 2)

Message	Description
STATUS:	Indicates the current IPX/SPX protocol status.
	READY: Indicates the HP Jetdirect print server is awaiting
	data over IPX/SPX.
	DISABLED: Indicates that IPX/SPX was manually disabled.
	INITIALIZING: Indicates that the print server is registering
	the node address or name. An additional status message
	may also be displayed.
	An error code and message is displayed if the print server
	is not ready. For more information, see Table 9.9.
PRIMARY FRAME	Specifies the frame type selection on the Jetdirect print
TYPE:	server.
	AUTO SELECT: The print server automatically senses and
	limits the frame type to the first one detected.
	EN_8023: Limits the frame type to IPX over IEEE 802.3
	frames. All others will be counted and discarded.
	EN_II: Limits the frame type to IPX over Ethernet frames.
	All others will be counted and discarded.
	EN_8022: Limits the frame type to IPX over IEEE 802.2 with
	IEEE 802.3 frames. All others will be counted and
	discarded.
	EN_SNAP: Limits the frame type to IPX over SNAP with
	IEEE 802.3 frames. All others will be counted and
	discarded.

ENWW HP Jetdirect Configuration Page 189